Short link chains for lifting purposes
Dimensions and Weights
| code | nominal size | WLL | MPF | BF | weight | ident no. |
| [mm] | [t] | [kN] | [kN] | [≈ kg/m] | ||
| ENORM K | 6 x 18 | 1,4 | 35,3 | 56,5 | 0,8 | 0310206003 |
| ENORM K | 8 x 24 | 2,5 | 62,8 | 101 | 1,5 | 0310208003 |
| ENORM K | 10 x 30 | 4 | 98,1 | 157 | 2,3 | 0310210003 |
| ENORM K | 13 x 39 | 6,7 | 166 | 265 | 3,9 | 0310213003 |
| ENORM K | 16 x 48 | 10 | 251 | 402 | 5,8 | 0310216003 |
| ENORM K | 18 x 54 | 12,5 | 318 | 509 | 7,4 | 0310218003 |
| ENORM K | 22 x 66 | 19 | 475 | 760 | 11 | 0310222003 |
| ENORM K | 26 x 78 | 26,5 | 664 | 1060 | 15,9 | 0310226003 |
Allowed working load limits according to EN 818-6 for different chain temperature:
| - 40°C to 200°C = 100% | 200°C to 300°C = 90% | 300°C to 400°C = 75% |
Once the ENORM-chain has cooled down to room temperature it can be again used to 100 %.
The ENORM chain corresponds in its dimensions the requirements of the EN 818-2.
The working load limits are 25 % higher than the values for grade 8 requires as per EN 818-2 however the diameter remaines the same.
The minimum elongation at fracture is 25 % (natural black) and 20 % coulor coated and this with at the same time increased strength.
The nominal strength of 1000 N/mm2 corrensponds to grade 10 EN 818-1.
The surface of all ENORM products is powder coated turquoise.
Additionally JDT proposes COR 92 as a corrosion protection for the ENORM-round link chain. Here the thermally applied organic coating is used.
This product
in grade 8
Spare parts
available