THEIPA Point-S weld on type
WLL EN
Measurements and Weight
| Code | Link | Weight | Ident no. | ||||||
|---|---|---|---|---|---|---|---|---|---|
|
a [mm] |
b |
g |
t |
Øxt1 x b1 [mm] | [kg] | ||||
| TP-S 2,5 | 5,5 x 45° | 52 | 68 | 57 | 16 x 70 x 34 | 0,95 | 0381502000 | Request here | |
| TP-S 4 | 7,0 x 45° | 57 | 74 | 62 | 18 x 85 x 45 | 1,30 | 0381504000 | Request here | |
| TP-S 6,7 | 8,5 x 45° | 70 | 95 | 78 | 20 x 85 x 45 | 2,20 | 0381506000 | Request here | |
| TP-S 10 | 10,0 x 45° | 80 | 102 | 83 | 23 x 115 x 60 | 3,30 | 0381510000 | Request here | |
| TP-S 17 | 12,0 x 45° | 100 | 129 | 106 | 30 x 140 x 70 | 6,66 | 0381517000 | Request here | |
| TP-S 28 | 12,0 x 45° | 129 | 174 | 135 | 34,5 x 170 x 80 | 13,67 | 0381528000 | Request here |
Additional information
The advantages:
- Marks on the swivel give a clear indication of inclination angles.
- Additinal ball bearing system allows for smooth swiveling under load.
- Crimpfeature on the link prevents the link from kinking.
- Both internal and external surfaces are protected against corrosion by a tough galvanized coating.
- Improved swivel to surface contact is due to special machining.
- Ball bearing wear can be visualla recognized by the gap on the wear ring without measuring instruments.
- Secured four times against breakage in all load directions.
- The stamped WLL applies to the kind of attachment at 90°.
Marks on the swivel give a clear indication of inclination angles. Additional ball bearing system allows for smooth swiveling under load.
With the WLL-table you can measur disposal stage.
| Kind of attachment |  |  |  |  |  |  | ||
| Number of pieces | 1 | 1 | 2 | 2 | 2 | 2 | 3 o. 4 | 3 o. 4 |
| Inclination angle | 0° | 90° | 0° | 90° | 0°-45° | 45°-60° | 0°-45° | 45°-60° |
| WLL | WLL | WLL | WLL | WLL | WLL | WLL | WLL | |
| Code | t | t | t | t | t | t | t | t |
| TP-S 2,5 | 5,0 | 2,5 | 10,0 | 5,0 | 3,55 | 2,5 | 5,3 | 3,75 |
| TP-S 4 | 8,0 | 4,0 | 16,0 | 8,0 | 5,6 | 4,0 | 8,5 | 6,0 |
| TP-S 6,7 | 12,0 | 6,7 | 24,0 | 13,4 | 9,5 | 6,7 | 14,0 | 10,0 |
| TP-S 10 | 15,0 | 10,0 | 30,0 | 20,0 | 14,0 | 10,0 | 21,2 | 15,0 |
| TP-S 17 | 25,0 | 17,0 | 50,0 | 34,0 | 23,5 | 17,0 | 35,0 | 25,0 |
YOU STILL HAVE QUESTIONS ABOUT A SPECIFIC PRODUCT?
Feel free to call us at the following phone number. We will be happy to advise you!